Proper Training For Crane Operatives Is Vital

If you are the owner of a business that uses overhead cranes, one of the most important factors is to ensure that your workplace is safe and secure for your employees, and for anyone else who may visit your factory from time to time. Overhead cranes are heavy and powerful machines that can be used to move heavy loads and materials, and therefore it is essential that you make certain that your employees are properly trained in their use.

There are important things to understand, not the least of which is that overloading the crane can cause severe damage and can mean that the load could swing or drop. If something heavy is not properly secured and is dropped it can cause serious, or even fatal, injury.

Another problem is that of a swinging load. If the operator fails to centre the hoist over the load, then when lifting begins, the load will swing towards its’ centre of gravity and could strike another employee.

An Accredited Course

All employees who are required to operate an overhead crane should, therefore, attend a course that is accredited by a recognised institution. It should also provide a certification that is recognised as well. The course should enable employees to understand the various risks connected to using overhead hoists which will enable them to spot any potential problems in the working environment. They should also be able to use the appropriate safety equipment and PPE in your individual situation. In addition, crane operatives must be able to recognise and immediately respond to any emergency that could arise.

Of course, another very important factor is the condition of your equipment. Overhead cranes should be regularly serviced and checked for any faults. As with any other equipment, nothing lasts forever, and parts do wear out. So, it is essential that any worn parts are replaced before they become dangerous.

At CY Electrical & Cranes we are one of the largest stockists of parts for cranes and overhead hoists in the UK, and we can provide everything you need when your crane needs an overhaul and/or service. So, you might need flatform cables, brake parts, pendant cables, and so on.We can provide you with round slings, web slings, hoists, conductor systems, radio remote controls, and C-rails, as well.

Our flatform cables are available in any length that you require, from 5 metres to drums of 500m and more. They have copper conductors and are PVC insulated, with temperature ratings of -30 to +70.

Comments

Post a Comment

Popular posts from this blog

Why Ravioli Slip Rings Outperform Traditional Designs

Image
  The ravioli slip ring is a flattened, round, disc-like shape that mimics the Italian pasta of the same name. This tiny design was developed to maximise space economy in settings where a standard tubular or capsule slip ring could be too bulky or heavy. It was not picked randomly. Another facet of their innovation is the use of materials that make slip rings easier to create. High-grade conduction metals, such as copper or silver alloys, for internal wiring, have been carefully selected for their superior gearbox performance. These are used with strong yet lightweight materials for the external shell, such as aluminium or various hardened plastics. The materials must be robust enough to withstand the demands of various working environments, hence increasing the slip rings' lifetime and durability. Ravioli slip rings differ from other types of slip rings because of a few distinguishing features. The most striking feature is its flat, tiny design, which has significant spac
Read more

Brakes Are An Essential Part Of Our Lives

Most people are well aware that when you drive a motor vehicle it will have a brake, and also a clutch - as long as it does not have an automatic gearbox in which case it only has the brakes. What most people may not realise is that many other pieces of equipment also require a brake and a clutch, including things such as cranes, for instance. That is understandable if you are not an engineer, but they are essential in order for everything to work as it should. So, if you are operating a crane from a cab 100 feet or more above the ground, there has to be a way to stop it when it lowers a heavy item, or any item really, to the ground - or the other way around, when it has lifted the load to whatever height is required. For that, you need a brake and a clutch. There are also many other pieces of equipment that are needed to swing the jib around and to run the load out along the jib to wherever it needs to be, and that includes a brake and clutch too. When you stop to think about it
Read more

How Long Will A Crane Last?

Many industries require the use of a crane for lifting heavy items and transporting them efficiently and with precision. When we say heavy loads, we mean it. For example, a Wolff 255B can lift a load of 14 tons at 100m a minute on a single line pull. However, many other cranes are slower. One of the things that we get asked at CY Electrical & Cranes is how long a crane can last before it is time to scrap it and replace it. Obviously, this can vary and there are a number of factors which will affect it. The average life of a crane can vary between 15 years and 50. Obviously, the quality of materials used in construction will have an effect, but then so will the weather. A crane is out in all weathers, no matter what, and the working parts of the crane can be affected. Too high and too low temperatures can cause issues. Parts can freeze and deteriorate. Oil will deteriorate as well. Dust, metal shavings, and other impurities that can arise on many construction sites will also h
Read more